The way of dry ice blasting is no longer unfamiliar to people. With the maturity of dry ice blasting service, the well-known four major industries, power industry, automobile industry, electronics industry, and petrochemical industry, are all inseparable from this reliable and efficient cleaning method.

The advantage of using Dry ice cleaning machine for cleaning is to effectively decompose the cleaned pollutants; reduce power loss due to the removal of these pollutants; reduce the maintenance cost of external equipment and its basic equipment; non-abrasive cleaning, maintain the insulation of the insulator Complete; more suitable for preventive maintenance.

1. Application of dry ice in the power industry

It can clean electric boilers, condensers, and various heat exchangers; dry ice can directly clean indoor and outdoor transformers, insulators, distribution cabinets, and wires and cables with load (below 37KV); generators, motors, Rotors, stators and other parts are cleaned without damage; steam turbines, turbine upper impellers, blades and other parts are cleaned of rust, hydrocarbons and adhesive powders, without removing the blades and re-adjusting the dynamic balance of the blades.

2. Application of dry ice in the automobile industry

Clean the door skin, roof, car compartment, oil stains on the bottom of the car without water stains, and will not cause water pollution; car carburetor cleaning and car surface paint removal, etc.; remove engine carbon deposits. Such as processing carbon deposits, it takes a long time to treat with chemical agents, at least 48 hours or more, and the agents are harmful to the human body. The dry ice cleaning service can completely solve the carbon deposition problem within 10 minutes, which saves time and reduces costs, and the descaling rate reaches 100%.

3. Application of dry ice in electronics industry

Clean the internal grease and dirt of robots and automation equipment; remove integrated circuit boards, post-welding flux, contaminated coatings, resins, solvent-based coatings, protective layers, and photosensitive anti-corrosion agents on printed circuit boards.

4. Application of dry ice in petrochemical industry

The dry ice produced by the dry ice making machine can clean the main fan, air compressor, smoke machine, steam turbine, blower and other equipment, as well as various heating furnaces, reactors and other coking and coking removal. Clean the polyvinyl chloride resin on the heat exchanger; remove oil, rust, hydrocarbons and surface dirt on various pressure vessels such as compressors, storage tanks, and boilers; clean reactors and condensers; decontaminate complex bodies; Furnace tube cleaning, etc.

In short, the Dry ice cleaning machine can be cleaned on the spot. This advanced cleaning method can not only save man-hours, but also save costs and bring benefits to the enterprise.